Home > Servers > Pci Riser

Pci Riser

can you transfer a compaq deskpro into a tower case?

i have a compaq deskpro en p866,and am wondering can you transfer all the components into a tower case ,i know i can transfer the hard drive and optical drives but the pci cards are on a riser and the motherboard and psu could be a problem,as anyone had any experience in transfering a desktop into a tower,i would be gratefull for any answers

Did you measure the width and height of the old case and compare the measurements to the new case?? You know how the saying goes, “Measure twice, cut once!”.

As long as the riser is attached to the motherboard somehow that shouldn’t be a problem. If the riser is riveted to the old case you may have to remove that rivet(s) that hold it and modify the new case to accommodate it. If the motherboard is not removable you may just want to start from scratch and build a new computer. Salvage all the parts you can, mobos are not too expensive, but make sure that you get one that will accommodate the type of CPU and memory that you have. If you decide on a mobo, go to the manufacturers web page and get all the info you can. They usually have a section set up for CPU Support which will let you know what CPUs can be used with that mobo. Another way is to go to a local computer shop, not best buy or circuit city, but a “Mom and Pop” shop and see if they have any old Compaq’s laying around that you can use for parts. The power supply is probably riveted into the case, drill out the rivets, BE GENTLE this is a computer and not a piece of plywood. If you cannot get it out you’ll have to get one from HP for many $$$. If you decide to build one or replace the mobo get at least a 400 watt 19 amp power supply. That should be enough to power 2 HDDs, 2 optical drives, a floppy drive, and a 120mm case fan.


New - PCI-Exp Riser Card x4 Left by Startech.com - PEX4RISERF


New – PCI-Exp Riser Card x4 Left by Startech.com – PEX4RISERF


$44.88


PCI Express x4 Left Slot Riser Adapter Card with 7cm Flexible Cable…

New - PCI-Exp Riser Card x4 Left by Startech.com - PEX4RISER


New – PCI-Exp Riser Card x4 Left by Startech.com – PEX4RISER


$34.65


PCI Express Riser Card – x4 Left Slot Adapter for 1U Servers…

New - PCI-Exp Riser Card x8 Left by Startech.com - PEX8RISER


New – PCI-Exp Riser Card x8 Left by Startech.com – PEX8RISER


$24.42


PCI Express Riser Card – x8 Left Slot Adapter for 1U Servers…

PCI 32X Riser adapter with Flex Cable


PCI 32X Riser adapter with Flex Cable


$4.95


PCI 32X Riser adapter with Flex Cable

2 layer PCB
PCI Flexible Cable Extender Card
PCI 32X slot soldered with normal flex ribbon cable.
This riser card provides expansion for 1 slot with cable.
No Driver necessary

Interface : 32X

Length : 6 Inches…


PCI-E Express 1X Riser Card with Flexible Cable


PCI-E Express 1X Riser Card with Flexible Cable


$3.14


PCI-E Express 1X Riser Card with Flexible Cable

2 Layer PCB
PCI-E Express Flexible Cable Extender Card
PCI-E 1X slot soldered with normal ribbon cable.
This riser card provides expansion for 1 slot with cable.
No Driver necessary

Interface : 1X

Length : 6 Inches…


PCI-E Express 16 x Riser Flexible Cable


PCI-E Express 16 x Riser Flexible Cable


$4.89


PCI-E Express 16 x Riser Flexible Cable

2 layer PCB board
PCI-E Express Flexible Cable Extender Card
PCI-E 16X slot soldered with normal ribbon cable.
No Driver necessary and not support hot swappable.

Interface : 16X

Length : 6 Inches…


New CHENBRO Case Rackmount RM22300 Rackmount Chassis 2U 300W PS/2 PSU w/o Backplane/ HD Tray Low Profile


New CHENBRO Case Rackmount RM22300 Rackmount Chassis 2U 300W PS/2 PSU w/o Backplane/ HD Tray Low Profile


$316.18


Reminder: CPU, Memory, Systems, Notebooks, and Software products are not returnable for Credit. A 15 days from date of invoice; during first 7 days no restocking fee will be charged in most cases, provided item(s) are returned as new, unopened, complete and in re-sellable condition. After 7 days a 15% restocking fee will apply. The customer can have a replacement of items purchased during first 30…

New CHENBRO Case Rackmount RM22300 Rackmount Chassis 2U 300W PS/2 PSU Backplane/HD Tray Low Profile


New CHENBRO Case Rackmount RM22300 Rackmount Chassis 2U 300W PS/2 PSU Backplane/HD Tray Low Profile


$316.18


Reminder: CPU, Memory, Systems, Notebooks, and Software products are not returnable for Credit. A 15 days from date of invoice; during first 7 days no restocking fee will be charged in most cases, provided item(s) are returned as new, unopened, complete and in re-sellable condition. After 7 days a 15% restocking fee will apply. The customer can have a replacement of items purchased during first …

CHENBRO Case Rackmount RM22300 Rackmount Chassis 2U 300W PS/2 PSU Backplane/HD Tray Low Profile New


CHENBRO Case Rackmount RM22300 Rackmount Chassis 2U 300W PS/2 PSU Backplane/HD Tray Low Profile New


$316.18


Reminder: CPU, Memory, Systems, Notebooks, and Software products are not returnable for Credit. A 15 days from date of invoice; during first 7 days no restocking fee will be charged in most cases, provided item(s) are returned as new, unopened, complete and in re-sellable condition. After 7 days a 15% restocking fee will apply. The customer can have a replacement of items purchased during first 30…

RSC-RR1U-E16 with Pic-e X16 Output


RSC-RR1U-E16 with Pic-e X16 Output


$11.99


Supermicro RSC-RR1U-E16 Riser Card…




Related Blogs

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay
  1. No comments yet.
  1. No trackbacks yet.